Categories
Information

Bending and Back Formers

REMS Bending and Back Former Table (click image to enlarge)
Back to List
SKU:
Various
 
Call/Email for more information
 

Bending and Back Formers:  Form and pressure resistant, in high-strength, high-slide, glass-fibre reinforced polyamide.  Optimum mating of bending formers and back formers ensures sliding appropriate to the material without cracks and wrinkles.  Angle scale 0 to 180 degrees provided on each bending former and mark on the back former ensure precise bending.  Rapid change of bending formers and back formers.

 

Accessories for REMS Curvo, REMS, Curvo 50 and REMS Akku-Curvo

Bending and
back former

for tubes
Ø mm/inch O.D.

Bending Radius mm

Suitable for

Art. -No.

Cu

Cu-U

St 2463

St 2394-U

St 2391 - 2394

St 10255

St 50086

V

 

10

40

 

 

 

 

 

 

581400

12

45

 

 

 

 

 

581410

14, 10 U, 1/4 (DN 6)

50

 

 

 

581420

15,12 U

55

 

 

 

 

581430

16, 12 U

60

 

 

 

581440

17, 15 U

56

 

 

 

 

 

 

581110

18,14 U, 15 U, 3/8 (DN 10)

70

 

 

 

581450

20,16 U, 18 U

75

 

 

 

581080

22, 18 U, 1/2 (DN 15)

77

 

 

 

581460

22, 18 U, 1/2 (DN 15)

88

 

 

 

 

581470

24,22 U

75

 

 

 

 

 

 

581130

25

98

 

 

 

 

581180

26

98

 

 

 

 

 

 

581270

28, 3/4 (DN 20)

1021)

 

 

 

 

581070

28, 3/4 (DN 20)

114

 

 

 

 

581310

30, 28 U

98

 

 

 

 

 

 

581150

32

98

 

 

 

 

 

 

 

581280

32

114

 

 

 

 

 

581320

35

140

 

 

 

 

 

 

 

581350

40

140

 

 

 

 

 

 

 

581330

 

3/8” (9.5 mm)

43 / 1.69”

 

 

 

 

 

 

 

581200

1/2” (12.7 mm)

52 / 2.05”

 

 

 

 

 

 

 

581210

5/8” (15.9 mm)

63 / 2.48”

 

 

 

 

 

 

 

581220

3/4” (19.1 mm)

75 / 2.95”

 

 

 

 

 

 

 

581230

7/8” (22.2 mm)

98 / 3.86”

 

 

 

 

 

 

 

581240

1” (25.4 mm)

98 / 3.86”

 

 

 

 

 

 

 

581250

1” (25.4 mm)

101 / 3.98”

 

 

 

 

 

 

 

581370

1 1/8” (28.6 mm)

102 / 4.02”

 

 

 

 

 

 

 

581260

1 1/4” (31.8 mm)

114 / 4.48”

 

 

 

 

 

 

 

581320

1 3/8” (34.9 mm)

140 / 5.51”

 

 

 

 

 

 

 

581350

 

 

1)       

 

According to DVGW work sheet GW 392 minimum bending radius of 114 mm required for copper tubes Ø 28 mm.

Cu:

hard, half-hard, soft copper tubes, also thin-wall

St 2463:

stainless steel tubes of pressfitting systems DIN 2463

St 2394-U:

coated steel tubes of pressfitting systems mapress C-STAHL DIN 2394

St 10255:

steel pipes (thread pipes) DIN EN 10255 (DIN 2440)

St 2391-2394:

soft precision steel tubes DIN 2391–2394

St 50086:

conduit DIN EN 50086

U:

coated

V:

multi-layer composite tubes of pressfitting systems

Related Products
REMS Curvo
Call/Email for more information
REMS Curvo 50
Call/Email for more information